It’s a sad day. There are now ads in Wireshark. 🙁 Here’s how to remove them.
The Seeed SenseCap T1000 is an awesome little LoRaWAN device. A longer blog post about them will happen in the future, but for now I wanted to just quickly document the Data Rate setting.
Once an SSR appliance is connected to the Mist cloud, it’s easy to make changes to the config. However, if your ISP has assigned a Static IP Address, you’ll need to know how to set that on the SSR using the console port before it will be able to phone-home to the Mist cloud.
A new twist on my existing Copy As CSV macro, this code will copy the selected cells in an Excel spreadsheet as a JSON document to your clipboard.
Here’s a quick one. Sometimes you need to get two apps to talk to each other, but one only supports TCP and the other only supports UDP. (In my case, I’m hooking up my Axis Video Doorbell to trigger sound effects (and other things) in QLab for some Halloween fun.)
This is a continuance of my earlier article “Recovering from Juniper PoE Controller DEVICE_FAIL“.
Summer 2020, COVID Lockdown. A retrospective on installing 2000 APs in under 2 days.
Today’s post concerns temperature thresholds for telecom facilities, and the rabbit hole I discovered when figuring out how to monitor temperature of Juniper equipment.
Happy Birthday Marvis! Listen, you’re getting older, and… we need to talk.
This is a presentation given at the Wireless LAN Professionals Conference (WLPC) in Phoenix, AZ, USA in February 2024. The recording of this presentation is available here:
(https://www.youtube.com/watch?v=b_LShfjSGTY)https://www.youtube.com/watch?v=b_LShfjSGTY
There are likely going to be other reasons why you may get an error upon committing a config such as:
An analysis of the effects of mDNS and other traffic on a campus WLAN.
While listening to Clear to Send Episode 308 “Reduced Neighbor Report”, Francois and Jiri posed a challenge to develop a Short SSID translator… Challenge Accepted!
ERSPAN is a great way to remotely troubleshoot a wired connection remotely. Even before the work-from-home era, I dreaded having to head out to a location, setup a mirror port, and connect a laptop to grab a few packets. The process of getting to the location often took longer than solving the actual issue…
Ekahau makes a modified version of iPerf3 (called ePerf) that is designed to work better with their Site Survey application. Installing on Linux (RHEL, specifically in this guide), is fairly straightforward, but is poorly documented. I aim to correct that.
DHCP Security (or Snooping) is critical in a campus environment. Unfortunately, deploying it correctly always seems to have a snag.
There are more things available than you can see in a single visit, several of them you have no idea what they’re for.
Lithium Ion batteries and flying. You might be given trouble at the airport when your checked or carry-on bags contain batteries, like the Venvolt or the Accelerator. @CaNerdIan had a great idea though – put one of those shipping/warning labels on your bag!
Enabling a password or 2FA policy on Mist is quite a painless change, however there is a gotcha I encountered.
Single Sign On is one of those computing magic tricks where the magicians never reveal their secrets. Sometimes, us muggles are asked to perform works of sorcery and illusion and we have to put on a good show.
There are some known issues with Juniper EX Switches and some earlier builds of Junos 18 regarding having insufficient free storage space when attempting to upgrade the Junos software. I’m going to detail 2 methods of getting the upgrade to work while in this situation.
Today, I am pleased to announce the first public release of dartmist – A Python Library for the Mist API.
I’ve come across a few instances where I’m troubleshooting WiFi APs that won’t power on or stay powered on. Fortunately, the issues were bad wiring or patch cords, but I did quite a bit of digging into the labyrinth of hamster wheels that make up a Juniper switch and discovered some very low level commands that proved useful. My attempt to document them is below.
Download a PDF copy of this article

These steps won’t solve all issues, but they may help resolve some common problems with home Wi-Fi networks.
LLDP can send a lot of useful information. One thing I discovered was that Juniper switches send their chassis serial number as a vendor-specific TLV. Ok, maybe not the most exciting discovery, but since Wireshark can’t decode this (yet), I thought I’d share.
We’ve recently begun to post our maintenance windows as “Network Updates” instead of “Network Outages”. At a Layer 8 this makes sense, keeps the bosses and the users all warm and fuzzy.
Mist APs seem to maintain their channel width upon detecting a DFS event. They do not narrow down to 20MHz. They also do not all jump to channel 36 upon such an event, they seem to pick a next-best channel.
Ever need to export cells to a CSV file? Tired of copy/pasting the cells you need into a new, blank sheet and exporting it as a CSV? Then being told you might lose some compatibility features, then needing to save-as a proper XLSX file again so you don’t lose sheets when saving again? Try this!
So, Mist’s cloud is having a bit of a hiccup right now. Not sure why, but I thought I’d share the user experience during this outage.
The Juniper SRX320 is a pretty powerful little firewall (and router, switch, etc.). I mean, just listen to that fan when it boots up! Or take a look at the AC adapter! That’s some power! (Well-known fruit brand charger shown for scale.)
Sure, you could follow the instructions here: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/recovery-using-emergency-boot.html#id-creating-an-emergency-boot-device-for-routers
My colleagues and I often get asked the same several questions regarding our decision at “A College” to choose Mist as our WiFi vendor and Juniper as our switching/routing vendor. In this series of posts, I will be sharing my answers to those questions.
If you’re like me, you’ve probably got every stencil from every vendor always open in Visio. This macro code will close them all in one go.
When using bonded channels in 5GHz (40MHz or 80MHz bandwidth), Mist RRM uses the lower channel of the bond as the primary. (ex, if bonding channels 44 and 48, it will select 44 as the primary channel).
As I install/upgrade a ton of new Juniper EX3400-48P edge switches in VCs, I’ve run into a few issues where upgrading Junos and then the PoE controller firmware results in the PoE Controller failing.
When manually running the RRM process via Network>Radio Management, the “Optimize Now” button only triggers the RRM process for the band that is currently displayed. If you want to optimize both 2.4GHz and 5GHz, you need to switch to displaying the 2.4GHz Band, click “Optimize Now”, then switch to the 5GHz Band, and click “Optimize Now” again. The Audit Log confirms this: