Summer 2020, COVID Lockdown. A retrospective on installing 2000 APs in under 2 days.
An analysis of the effects of mDNS and other traffic on a campus WLAN.
While listening to Clear to Send Episode 308 “Reduced Neighbor Report” I felt that there was a challenge to develop a Short SSID generator. Challenge Accepted!
These steps won’t solve all issues, but they may help resolve some common problems with home Wi-Fi networks.
My colleagues and I often get asked the same several questions regarding our decision to choose Mist as our WiFi vendor and Juniper as our switching/routing vendor. In this series of posts, I will be sharing my answers to those questions.
When using bonded channels in 5GHz (40MHz or 80MHz bandwidth), Mist RRM uses the lower channel of the bond as the primary. (ex, if bonding channels 44 and 48, it will select 44 as the primary channel).
When manually running the RRM process via Network>Radio Management, the “Optimize Now” button only triggers the RRM process for the band that is currently displayed. If you want to optimize both 2.4GHz and 5GHz, you need to switch to displaying the 2.4GHz Band, click “Optimize Now”, then switch to the 5GHz Band, and click “Optimize Now” again.
Some notes as I study for the CWNA exam. PLCP – Physical Layer Convergence ProtocolService within the PHY layer that…
